Main Feature 

● Rated Current: 10 (60) A

● Rated Voltage: AC 220V

● Active power、Voltage、Current、Power factor、Frequency

● Communication: RS485 (MODBUS-RTU)

● 8 digits LCD Display

● 35mm DIN Rail Installation

● CE Certificated

Overview

Parameter

Wiring

① Pulse output light   ② Panel   ③ Brand/Model   ④ Outlet-wire   ⑤ RS485   ⑥ Neutral   ⑦ Enter-wire

Network

Package

MINIMUM PACKAGE
MINIMUM PAKAGE	Package dimensions(1 PC) 170*150*130mm		Pakage Weight(1 PC) 0.5Kg
WHOLE BOX PAKAGE	Package dimensions(36 PCS) 450*240*250mm		Pakage Weight(36 PCS) 18.5kG
PRODUCT HS CODE	9028301400

FAQ

Q:The display power or energy count is inaccurate after the meter powered on.

A:Switch the meter display interface to the power (active power P, power factor λ) interface, and check whether the power display is negative or not.And whether the power factor is between 0.9-0.95, and then check whether the incoming and outgoing wires of the current signal wire are connected reversely (that is, the current The incoming wire must be the same as the incoming wire end of the meter), and consistent with the wiring diagram on the meter.

Q:It cannot communicate with the host computer normally after the instrument powered on.

A:1. The voltage value between the communication output A and B of the measuring instrument should be between +(4.4-4.5)V .

   2. Check whether the communication wiring method is correctly wired according to the wiring diagram (that is, the communication terminal A/B of the instrument must be connected with Corresponding to communication serial port A/B);

Product Application